This is a plug n' play software add-on and an accompanying ECU interface cables that enable your Race-Keeper HE on-board video data logger to capture data from the Bosch MS 3.1 ECU as fitted to the Porsche GT3 Cup car. Data traces are acquired automatically, synced automatically with video, and automatically made available for display in Race-Keeper Comparo.

The Bosch MS 3.1 ECU CAN data software add-on acquires five essential driver input channels...

• Speed
• RPM
• Throttle
• Steering Angle
• Gear

...and up to nine engine data channels:

• Water Temp
• Oil Temp
• Intake air Temp
• Fuel Pressure
• Oil Pressure
• Exhaust Temp
• Brake Pressure (Rear)
• Brake Pressure (Front)
• Vehicle Yaw Rate

The above channel list assumes that all appropriate sensors are fitted to the vehicle.

Race-Keeper’s CAN ECU interface cable for Porsche GT3 Cup car is supplied with a 6 way ASL connector that will mate with the on-board Bosch ECU CAN connector, making installation quick and simple.
On the Race-Keeper video data logger the CAN cable plugs into the CAN port that is integrated into the Race-Keeper HE power connector.

An optional Y loom is available that splits the Bosch MS3.1 CAN cable into two AS connectors - one for Race-Keeper CAN and one to connect to the vehicle dash or other CAN device such as a shift light or ABS system.