Outstanding, high-quality professional video cameras in enclosures designed for extreme motor sports environments. Available in three types of enclosures with three different lens sizes; see photo at bottom of page.

Square
Dimensions (mm): 37 (L) x 37 (W) x 14 (H), 23 (H) with lens
Horizontal resolution: 380 TV lines
Mounting method: Integrated bracket secured with 3M VHB bonding tape
Mounting location: Secure on any clean surface

High-Res Mini Square
Dimensions (mm): 30 (L) x 30 (W) x 11 (H), 28 (H) with lens
Horizontal resolution: 550 TV lines (high-resolution)
Mounting method: Integrated bracket secured with 3M VHB bonding tape
Mounting location: Secure on any clean surface

High-Res Mini-Bullet
Dimensions (mm): 66 (L) x 19 (W) x 19 (H)
Horizontal resolution: 550 TV lines (high-resolution)
Mounting method: L-bracket or collar clamp
Mounting location: Roll cage section or self-adhesive rubber bullet bracket
Water resistant (IP 67)

Specifications

• Video format: NTSC
• Image sensor: 1/3" Sony ICX638 Super HAD CCD
• Scanning system: 2:1 interlace
• Total pixels: (H) 811 x (V) 508, 401K
• Electronic shutter: 1/60~1/100,000 (auto)
• S/N ratio: Over 45 dB AGC Off (high-res)
• Video output: 1 Vp-p, 75 Ohm
• Back light comp.: Yes
• Auto white balance: Yes
• Gamma correction: >0.45
• Sync mode: Internal synchronization
• Power source: DC12V ± 10%
• Power consumption: 90mA maximum
• Operating temperature: -10°C ~ 45°C / 14°F ~ 122° F
• Storing temperature: -20°C ~ 60°C / -4°F ~ 140°F
• Sensitivity: 0.2 lux/F=2.0 (high-res);0.3 lux/F=1.2 (standard square camera)