Race-Keeper SE

Universal 5V sensor cable connects 5V analog sensor(s) to sensor input(s) on the Race-Keeper SE system.

6' cable connects to Race-Keeper system using a locking RJ-45 connector; cable is unterminated at other end with three bare wires which accommodate user termination to any 5V analog sensor.

Data from sensor is automatically calibrated and displayed using Race-Keeper Comparo software:

• Steering (1st (left)port on top row of connector panel)
• Throttle (2nd port on top row of connector panel)
• Brake (3rd port on top row of connector panel)

Ports 4-8: Data displayed as raw 0-5V signal

Current limited 5V supply on sensor cable can supply up to 500mA to the connected sensor.

Race-Keeper HE

Universal 5V sensor cable connects to any of the analog sensor inputs on the 3-Analog Sensor Cable (Race-Keeper HE) and the 3-Analog + 2-Digital Sensor Cable (Race-Keeper HE).

6' cable connects to Race-Keeper system using a 6-pin locking connector; cable is unterminated at other end with three bare wires which accommodate user termination to any 5V analog sensor.

Data from sensor is automatically calibrated and displayed using Race-Keeper Comparo software as steering, throttle or brake.